Standard headrail configuration also referred to as a 1-on-1 headrail, meaning there is one cellular shade on the headrail.
Allows two independently operated cellular shades to share one common headrail. Ideal for large window openings that will benefit from the increased light control of two shades. In addition two smaller shades are easier to operate than one large shade. Options that have a surcharge will be charged twice, one for each shade on the headrail.
The shade is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.
The shade is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.
Standard mounting bracket that allows inside mount shades to be mounted to the top/ceiling of the opening. Bracket can also mount to the back/wall.
Allows shades to be mounted to the sides/ends of the opening, rather than to the top/ceiling as standard. Maximum width allowed varies by lift type.
Allows for precise positioning of the shade while the continuous loop control remains the same length. Smooth Lift provides a smoother, quieter operating clutch mechanism as well as a contoured profile. Eliminates dangling cords, adding child safety and a neater appearance. Color-coordinated aluminum contoured headrail and bottomrail. Cord tension device must be mounted with tension on the cord for the shade to operate, required for added child-safety.
Standard length of the continuous cord loop is based on the height of the shade, as shown below. • Shade height 12" to 18" has an 18" cord drop length. • Shade height 18 1/8" to 42" has a 24" cord drop length. • Shade height 42 1/8" to 54" has a 36" cord drop length. • Shade height 54 1/8" to 72" has a 48" cord drop length. • Shade height 72 1/8" to 90" has a 60" cord drop length. • Shade height 90 1/8" to 110" has a 72" cord drop length. • Shade height 110 1/8" to 120" has a 96" cord drop length.
Custom continuous cord loop drop length is available for taller/shorter windows, windows higher off the ground, or difficult to reach windows.
Combines the continuous cord loop and the top down bottom up option, providing precise positioning of the shade and the ability to raise the bottom up and lower the top down for more control over the shade position. Has two continuous cord loops, one on the right and one on the left, and two tension devices for child safety.
The right cord operates the top/middle moving rail and the left cord operates the bottomrail.
The right cord operates the bottomrail and the left cord operates the top/middle moving rail.
Best for Kids™ - The Lift & Lock cordless option has a bottomrail that features a handle with a button for operation, that helps prevent typical shade spring back. Simply press and hold the button to easily lift or lower the shade, then release the button to lock in position. It also eliminates dangling cords, providing the ultimate solution for child safety and ease of use.
The Low Profile Headrail measures 9/16" x 2" (Height and Depth). Requires a minimum inside mounting depth of 1 1/4". Same headrail as Standard Cord Lift and Top Down Bottom Up Cord Lift. Standard headrail for the Lift & Lock Cordless lift.
The Premium Headrail measures 1 7/16" x 2" (Height and Depth). Requires a minimum inside mounting depth of 3/4". Same headrail as Continuous Cord Loop, Continuous Cord Loop TDBU, Cordless, Cordless TDBU, PowerWand, Simplicity Motorized, and Simplicity TDBU Motorized.
Best for Kids™ - The Lift & Lock cordless top down bottom up option combines the lift & lock and the top down bottom up lift types. Both the middle rail and the bottom rail feature a lift & lock handle with a button for operation. Press and hold the middle rail button to easily lift or lower the shade from the top down. Press and hold the bottom rail button to easily lift or lower the shade from the bottom up. Release the button to lock the respective rail in the current position. Eliminates dangling cords, providing child safety and ease of use.
Best for Kids™ - Lifts and lowers the shade with ease by gently pulling or pushing on the bottomrail. Features a color-coordinated aluminum contoured headrail and bottomrail. Perfect for homes with children or pets, the cordless lift completely eliminates the dangling cord hazards of traditional cord-controlled lifts.
No extension pole required. Shade is within reach of the operator.
A 5 to 10 feet extension pole that makes it easier to reach and operate shades that are mounted in tall windows.
Best for Kids™ - The two most popular lift options are combined for an innovative lift system. Cordless provides an easy and effortless way of raising and lowering the shade and it is child safe as there are no hanging cords. The top down bottom up provides a way to raise the shade from the bottom up, the traditional way, plus it also allows for the shade to be lowered from the top down to allow light in while maintaining privacy. Has an off-white light blocking insert in the bottom of the top rail. A magnetic catch eliminates the light gap between the headrail and moving top-rail.
Best for Kids™ - Simple push button motorization using the attached wand control. The top and bottom limits are preset based on the ordered shade height, use the middle button to set your favorite position. A rechargeable battery is concealed inside the headrail. Charging port is built into the wand. Portable charger is a separately priced option. Will operate for 6 months between charges based on average use. Child safe cordless operation.
The portable charger plugs directly into the the wand control to recharge the internal battery. Order at least one charger for all of your PowerWand controlled shades.
Shares a charger from another shade on this order or a previous order. All PowerWand controlled shades must have access to a charger.
Best for Kids™ - Radio Frequency motor with a rechargeable Li-ion battery that is concealed inside or behind the headrail. Charging port is located on the back of the headrail. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery. Child safe cordless operation.
Shares a multiple channel remote (5-channel or 6-channel) from another shade on this order. Select the line item number of the shade with the shared multi-channel remote. All shades must have access to a remote control.
Fifteen (15) channel RF remote control features 15 individual frequency channels and an "All" channel that operates all the shades at once. Includes a holder that can be mounted to the wall. Range of approximately 80 feet. Remote uses CR2450 battery, included. Cannot control TDBU shades.
The plug-in charger plugs directly into the the charging port located on the end of the motor to recharge the internal battery. Charger cord is approximately 10ft long. Order at least one charger for all of your AMP Rechargeable Motorization controlled shades.
Shares a plug-in charger from another shade on this order or a previous order. All Simplicity Rechargeable Motorization controlled shades must have access to a charger.
Optional Solar Charging Power Panel uses low light harvesting technology to power your shades. Can only be used on one shade, cannot be shared between multiple shades. Solar power panel measures 18.5" x 1.5" and includes mounting brackets.
Solar panel charger is not required for this shade.
Select this option if you have no need for smart home integration or shade control with your phone, tablet or PC.
The AMP USB Bridge V2 is a small device that you install in your home that allows you to set automatic opening and closing times for AMP motorized shades. The AMP Bridge connects to home networks to allow window coverings to be controlled via the AMP App, voice control, or through additional connected IFTTT systems. Seamless integration with Amazon Alexa, Google Assistant, Apple Shortcuts, Siri, SmartThings, and IFTTT. Easy to install USB device to any Wi-Fi connection, just Plug & Play. Covers a range of 98 feet (larger homes may require additional Smart Hubs). Connect up to 30 devices per Smart Hub. Requires a 2.4GHz network (IEEE 802.11 b/g/n) WiFi signal. A USB power supply (sold separately) must provide 5V/1 Amp of power.
Top Down Bottom Up functionality controlled by a Radio Frequency motor with a rechargeable Li-ion battery that is concealed inside or behind the headrail. Shades are programmed at the factory with up and down stop limits. Personal favorites position can be set after installation. Includes motor and battery.
Shares a 14-Channel Top Down Bottom Up remote from another shade on this order. Select the line item number of the shade with the shared 14-Channel Top Down Bottom Up remote. All shades must have access to a remote control. Will not operate with remotes for Bottom Up only shades.
Fifteen (15) channel RF remote control features 15individual frequency channels and an "All" channel that operates all the shades at once. The 15-Channel TDBU remote is the only remote that can control the AMP Top Down Bottom Up motorized shades. Controls both AMP Top Down Bottom Up motorized shades and standard AMP (Bottom Up) motorized shades. Remote uses a CR2450 battery, included. Can only control TDBU shades.
Aluminum headrail and bottomrail are color coordinated to the shade fabric. Endcaps are color coordinated.
Headrail and bottomrail are fabric wrapped for an upgraded premium appearance. Endcaps are color coordinated.
Mounted on the wall or door to support the bottom rail of the shade, preventing the shade from swaying. Recommended for French Doors or for shades that you will never raise or lower.
Projects the back of the shade up to 3" from mounting surface and requires a 2" flat surface. Outside mount only.
One spacer block per mounting bracket to provide 1/2" of additional space between the mounting surface and the shade. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.
Two spacer blocks per mounting bracket to provide 1" of additional space between the mounting surface and the shade. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.
Three spacer blocks per mounting bracket to provide 1 1/2" of additional space between the mounting surface and the shade. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only.