Customize your Signature Cordless 2" Wood Blinds

Standard headrail configuration also referred to as a 1-on-1 headrail, a single blind is on the headrail.

Allows two independently operated blinds to share one common headrail. Ideal for large window openings that one single blind cannot cover. Provides increased light control plus two smaller blinds are easier to operate than one large blind. Options that have a surcharge will be charged twice, one for each blind on the headrail.

The blind is mounted inside the window opening for a clean, tailored look. When selecting the size of your blinds, enter the exact dimensions of your window opening. Do NOT enter the size of an old/existing blind. The factory will make the necessary deductions for a proper fit. Please make sure your window meets the minimum inside mount depth required to accommodate the brackets, or the flush mount depth if desired. Depth requirements can be found on the product page.

The blind is mounted on the wall or window trim outside and above the window, covering an area larger than the window opening. Outside mount is required if your window opening is not deep enough to install the blind as an inside mount or if you want to make your window appear larger than it is. When measuring your blinds make sure to adjust the size for proper overlap.

Best for Kids™ - Cordless shades lift and lower with by just pushing up or pulling down on the bottomrail. Cordless is considered a safe choice if you have small children or pets in your home. Available with wand tilt only for additional child-safety. Plastic tilt wands are color coordinated with the slats.

Best for Kids™ - The Lift & Lock Cordless lift system is recommended with the wand tilt option to eliminate all dangling cords, providing the ultimate solution for child safety and ease of use. To operate simply press and hold the bottomrail button to easily raise or lower the blind, then release the button to lock the blind in position. Features an aluminum bottomrail color-coordinated to the slat color.

Standard cord lift length is approximately 40% of the ordered height of the blind when the blind is in the fully lowered position. Cord will get longer as you raise the blind.

Custom cord lift length for taller windows, windows higher off the ground, or difficult to reach windows. Cord length is when the blind is in the fully lowered position. Cord will get longer as you raise the blind. Recommended that the ordered length is at least 4-feet off the ground and/or out of the reach of children.

Best for Kids™ - Standard tilt option. Traditional method of tilting the slats open or closed. When you rotate the wand in one direction, the slats open, and when you rotate it in the opposite direction, the slats will close. Recommended for homes with children and/or pets.

Standard cord tilt length is approximately 40% of the ordered height of the blind when the blind is fully tilted closed, for the fully extended tilt cord.

Custom cord tilt length for taller windows, windows higher off the ground, or difficult to reach windows. Cord length is when the blind is in the fully tilted position, for the fully extended tilt cord. This is the maximum cord length, cord will shorten when blinds are tilted open. Recommended that the ordered length is at least 4-feet off the ground and/or out of the reach of children.

Standard wand length is determined by the ordered height of the blind. Blind height up to 24" has 12" wand, blind height 24 1/8" to 36" has 20" wand, blind height 36 1/8" to 48" has 24" wand, blind height 48 1/8" to 72" has 36" wand, blind height over 72" has 48" wand. If you require a specific wand height, please select a custom wand length.

Custom wand length is available for taller/shorter windows, windows higher off the ground, or difficult to reach windows. Wands up to 48" are color coordinated wooden wands. Wands over 48" are clear plastic.

A 3" tall decorative wood valance that is color coordinated to the slat color. Standard valance option.

A 3" tall modern wood valance with a flat face. Color coordinated to the slat color.

Select this option if your mounting depth is at least 3 1/2" deep and you want a flush inside mount. If your window opening depth is not deep enough for a flush inside mount then we recommend the inside mount side returns.

If you do not have enough depth for a flush inside mount then select this option. The side returns will provide a finished look covering the exposed headrail sides. Side return size is 1/2" (measured from the inside/back of the valance to the end of the side return). The valance width will be approximately 1" wider than the than the blind width to accommodate the side returns (measured on the inside/back of the valance, between the side returns).

Designed to cover the sides of the headrail on outside mount blinds providing a clean, finished look. Side return size is 3" (measured from the inside/back of the valance to the end of the side return). The valance width will be approximately 1" wider than the than the blind width to accommodate the side returns (measured on the inside/back of the valance, between the side returns).

Custom side returns made to the size required for your unique installation. Side return size is measured from the inside/back of the valance to the end of the side return. The face of the side return is approximately 1/2" longer.

This innovative valance clip attaches the valance to the blind with magnets that are hidden from view from the front of the blind, providing a clean appearance. Allows for easy removal and placement of the valance on the blinds. Recommended for extended durability. Not recommended for blinds mounted to doors.

Select this option for the standard valance width. The standard valance width is based on the selected mount type and valance side returns. This is the option selected for the majority of installations.

Intended to cover a single blind the custom valance will be made to a specific width unique to your installation. If selected you will be prompted to enter the exact valance width desired. Ideal for inside mount blinds that have a larger width at the top of the opening compared to the smallest width of the opening. Valances with a finished face width over 90" wide will be center spliced (miter-cut). Ordered width is measured on the inside/back of the valance, between the side returns or from end to end if no side returns are ordered.

Select this option for all of the blinds that will share this common valance. Price is per blind.
The common valance is intended to cover multiple side-by-side blinds. If selected you will be prompted to enter the total valance width. The valance width will be factory adjusted based on the side return type selected. Reference the measuring instructions for this product to properly measure for a common valance. Valances with a finished face width over 90" wide will be center spliced (miter-cut).

Valance will have the standard appearance, made without a decorative keystone.

The decorative keystone will add dimensional appeal to the valance. The valance will be spliced with the keystone positioned in the center. The color of the keystone will match the valance. Assembly of the valance and keystone may be required. The addition of a keystone will not affect the overall width of the valance.

Mounted on the wall or door to support the bottom rail of the blinds, preventing the blinds from swaying. Recommended for French Doors. Available on outside mounts only.

Spacer blocks are used with mounting brackets to provide 3/8" of additional space between the mounting surface and the blinds. Typically used for clearance when installing blinds above raised trim, molding or window framing. Available on outside mounts only. Side return size will be 3/8" larger to accomodate the space blocks. Do not order unless required.